Unrelated Craft Post, Pok'emon Go - Gen 2 Theories - Buddy System

I know, I know I have not made a craft post for awhile, Sadly this is not an update of my works just yet, I have been busy working the festival season and having a week to just breath. However I will be creating stuff in the following weeks, Getting packaging sorted out for pens so they can be up for sale and getting on doing some brand spanking new cane designs. Hopefully to do some canes related to the starter Pokemon.

You can grab these on My New Store Be warned there is some mature content

I am working towards keeping the mature content separate from the good old'e Nerd stuff.

We all know that Gen 2 is going to be here in a few months, I felt like I needed to make a educated guess at how they will be using a new system to evolve the next generation of pokemon.

As everyone is already aware, there are many easter eggs on Pokemon Go, Such as Pikachu and Eevee jumping on your sholder after 10km of walking when they are your buddy Pokemon.

In the Pokemon gold, silver games and beyond, Pokemon evolved after being friendly.. This could be a clue to how you get that much wanted Umbreon and Espeon and this depends on if its day or night on which they evolve into... Naw

When the next generation comes forth I believe you will have had to walked so far with your Eevee and then the Evolution tab to spend candies to evolve your pokemon would be unlocked. Of course this is all theory but makes sense that this is how they would do it.  

For those not thhat familar with Pokemon, 

this could work for the following Pokemon. 

Golbat > Crobat

Eevee 

Day>Espion 

Night> Umbreon 

Chansey > Blissy 

Pichu > Pikachu 

Cleffa > Clafairy

Igglybuff > Jigglypuff 

Togepi > Togetic

Thanks for reading.  Happy Pok'emon hunting!

Very own shop finally open!

www.hootlootstore.cf

Ladies and Gentleman I am proud to present that my very own estore is finally underway and open for business!  You can now purchase some of the items which have been featured in this blog! :)

Don't be shy to leave me some comments and feedback
Kind regards
Owl!

Hand Crafted Pikachu Pokemon Earrings - Polymer Clay by hootlootstore

Previously on hootlootstore you seen the crafty work of a Pok'eball cane Here is what it resulted into, A lovely pair of dangly earrings! 

I made a Pikachu tail cane too sadly I did not photograph the process of this however if these sell well I will be making some more and will ensure that a tutorial of how I did it will be available.

I have several other item to come. Watch this space folks!

Dont forget to like me on Instagram and Facebook I am currently working to move away from Etsy and open my own estore. For now this is my Etsy Link.

Owl Polymer Cane - How to not mess up! KILL IT WITH FIRE!

Here I am going to tell you what not to do... this was how my Owl cane looked before shrinking, I would of been more than happy with the above picture... OH and on a side note, like my brand new cutting matt? ITS PINK! thanks to selling some crafts I could finally fork out for a semi decent one <3

However this is how it came out. :? Any advice is also welcomed with open arms in the comment section below. However I think it was down to the different consistency of clay as some of my clay colours was harder than others and I reduced it when it was warm too egar! :/

First I will give you steps on how I got to this point, To start off creating the eyes I extruded a circle and wrapped it in black polymer clay. I used two different tones of yellow to add a more detailed effects and a strip of white between.

To make the outsides of the eyes I piled strips of clay ontop of each other and then cut them evenly placing them around the inner eye. I then reduced the cane and cut it in half.

*I AM OWL FACE!*

  Use some yellow clay with a lighter colour for the outer areas and wrap a black strip of clay around the outside. Best off using the pasta machine! try grade 6.  

Next you want to be getting your extruder tool choose two colours you want together and use the lighter colour on the outside. Then you want to wrap that in a layer of black. You then want to be cutting it in half and place them around the beak make sure you place a black of the inner colour just above this gives a more feathered effect.

 Now you will want to get a few strips of yellow clay and place black strips between this will start to form you little owl feets. Next you want to be getting black strips in to fill any gaps then blend two colours (or even 3 depending how daring you are feeling!) together. You are building up the wings here have a lighter colour for the under wing. Make sure you have some clay left for the tail and head!

So once your stick it together it should look a little bit like it dose on the left,  Any clay from the wings keep to one side. pick up your owl now and just see if there are any holes at all visible! if there is you need to put some bits of black clay in between. 

Put the lighter colour under the owl wings and do you remember the left over clay you had? start make a little blob for the tail as seen to the right. Shape it how you see fit and make sure it has enough clay around it to support it enough to not warp.

 This is how it should look once you have put your tail, finished the wings and started working on the head.

 I used scrap clay left over from a butterfly pen I made for the background. I used the top of my left over clay for the head and added gold for the tips. All looks good? Great...

WHOA KILL IT!! KILL IT WITH FIRE, BEFORE IT LAYS EGGS!

Oppps. I think another issue here was that the cane is more circular than the one I built... nevermind one for the scrap pile.

Pokemon Mania! - Pok'eball Cane

As promised I said I would make a pok'eball cane so here is a short tutorial mainly via photos!

Make a white sausage and rap some black around it using the paster machine, Pref on grade 9.

You then want to be doing the same with some white clay but this time on grade 2 then do a grade 5 black on top of that.

Next you want to make two circle sausage I used my extruder to get perfect circles. Your then chopping them in half.

Good now you have your two half circles you want to get something like a pencil and just push it into the clay like you can see above.

Next use your extruder tool, IF you have one and use the long thin rectangle to create your black lines on your pok'eball, If you do not have an extruder a paster machine would work perfectly fine! Its just more accurate this way.

        

Check to make sure the holes on your white and black part of your pok'eball fit the middle and still look circular it might take a few fiddles to get it right! Then all you need to do is cut off the excess black and excesstube (Pok'eball button) in the middle.

Last off is the reduction I would recommend putting it in the fridge for half an hour to an hour before starting this (I did not do this because I was being impatient not to mentioned it was 3am) Then you should try reducing it in the middle first. I have found that this stop it warping as much.

So this is what it looks like once I sliced it! I hope you enjoyed this little walk through! If you did do not be scared to check out my shop Here Or if you would like to stalk me some what hit that Like Button On Facebook!

New products! and the aftermath of DL2016

Howdie guys! 

Now I know I have not posted anything for awhile but have been a busy bee! I am currently working on some nerdy stuff and pens!
You can see what I have to sell by clicking HERE!!! CLICK MEEE!

One of the reasons why you have not herd from me is because I was enjoying myself in a mud filled field! With of course awesome metal bands at one of the nicest festivals in the UK.
Lets have a look at that tan! Oh not had a tan like that in all of the 14 years of attending Donnington!

So Rain? Umbrella you say? Nah you need one of these!

A shield for all your rain and mosh pit needs.

Please take some time out to hit the Like Button On Facebook

Watch this space and I will see you soon guys!

Hoot Loot Store

x

#DL2016 #crafts #tutorials #handmade #loveleeds #Downloadfestival2016 #camping #drownload #umbrella #etsy #humour  #funny  #instagram  #facebook  #blog

Finished Willy Beads!!

 So here they are the beautiful willy beads I was commissioned to do, I made the backs different colours and so that each one could be still unique

To try and held the shape better I would recommend making them slightly larger than you would like, making your bead hole and then slicing them to size.

Very pleased with the outcome here! One happy customer too :)

If you like these have check out my Store, Like Me! or follow me on Twitter Or Instagram

Pearly Penis Piece (Polymer Cane)

 So you ever wanted to not grow up and make a penis out of clay? Well! Your at the right place then!

This is a little walkthrough of how I created a penis cane.

So first up I mixed some clay together to try and get the kind of colours I wanted just how you would if you was painting with acrylic paints. I then made basic shapes out of these clays I ensured one side had more lighter colour to be able to make shading effects. I used pearl mixtures on the tip to hopefully give it a slightly more moist looking effect.

I then mixed together white pearl with some good old fashioned bog standard blue,  I then used the pasta machine on number 5 to go around the edges ensuring to cut off any excess clay!

So there you have it you just keep going around until you have the shape you wish for, It is much easier if you have a circle or a square..

Then here is the difficult part..
Shrinking it down and sizing

So for shrinking it down.. if you have anything transparent and heavy try sticking it on one side. this helps it prevent it from warping. As soon as you can try to work it in the middle outwards, As you can see in the photo.

Now for the cutting!! The best part! (Which is optional however I am way too impatient to find out if I have messed it up!)

BOOTIFULS What a fine penis!  Much more attractive than the real thing don't you think?

Now all you have to do is work across to the ends so that it is all even across. The ends will be warped that is normal so don't worry no scrap clay ever goes to waste! So DO NOT throw it!

Bones Finished Earrings

This is a continued post from the Bones Canes, Here is what was made from them with still plenty of cane left. To the left is the dangly earrings and to the right the studded ones :)

Potentially the best thing I have made yet.
For those who don't know I take a lot of time and patients into creating packaging for my handmade jewlery too.

Dangly Fuck Polymer Clay Stud Earrings - Handmade By Hootlootstore

So finally opened my range to dangle earrings!  I found this quite fun experimenting away. Of course it took a little longer than doing stud earrings.

Like these? Well they will be up on etsy shortly

Click here to have a look! 

Creation Of Bones Polymer Cane

I've started creating a cane to eventually be transformed into some earrings for the band Bones, If you have never heard of them you should! Have a listen to the video above, Addictive music with an amazing voice to go with the insanely good base lines! 

So here is my chaotic glory!, I tried a new method to try and get less warping when reducing canes, I often seem to have issues with this as any cane creator dose! So here I have used an extruder and what I like to call the Pixel Method. This is where as you can see in the picture, you count how many blocks you need of each square, you also cut some for like the bit on the B for example, I did it in rows going from left to right and used the paster machine on grade 1 to do the gaps between the lettering.

Well these are the results, I am pretty presently surprised and happy with these so far! I had a few new toys to play with, an extruder which I seem to have already broke, So looks like I will be buying a new one off ebay today... £6 down Boh! I recommend to anyone who is in this department to pay a little extra for the slightly better ones.

Now to create them into earrings. Watch this space!